Banner with low poly plexus design

Epoxy Paint

Products
Epoxy Paint
Polyurethane Paint
Special Polymer
Elastomeric Coatings
Heat Resistant (HR) Paint
Thermosetting Acrylic (TSA)
Zinc Rich Coatings
Chlorinated Rubber (CR) Paint
  • Epoxy resin has reactive Oxirane groups that can be reacted with amine groups of various types of hardeners such as Polyamide, Polyamines, Cycloaliphatic amines, Phenalkamines, Phenalkmaides, etc.
  • Upon reaction with amines, oxirane groups open up into the hydroxyl group which offers excellent adhesion to the surface. The cured epoxy paint provides excellent resistance to corrosion and various chemicals, lubricating oils and petrochemical solvents.
  • Performance can be optimized by the selection of correct hardeners.
  • GP offers unique performance properties for its range of epoxy paint in India due to its institutional control over the hardener, which is tailor-made to offer a customized solution.

Primers

Epoxy Primer 206 FR

Epoxy Primer 209

Epoxy Primer 216

GP Prime 200

GP Prime 201

GP Prime 202

GP Prime 203

GP Prime 206

GP Prime 211 HBHS

GP Primeguard 235

GP Rustguard 238

GP Primeguard 235 UFD

GP Prime 213 AD Epoxy

Intermediates

GP Guard MIO 233

GP Guard MIO 240 

GP Guard HB 234 

Top Coats

Epoxy Novalac 

Epoxy Top Coat 234

GP Guard 231

GP Guard 232

GP Hisols 271

GP Hisols 272

GP HBSL Epoxy Coating

GP Superguard Glass Flake

GP Guardline 291

Industries we cover

Specializing in Superior Coatings for Every Industrial Needs

machine tools

Special Machine Tools

motor pump

Pump, motors, valves

Agriculture Equipment

Agriculture Equipment

Power and Electrical

Power and Electrical

auto component

Auto Components and Refinishing

Projects and Process

Projects and Process

Infrastructure and Construction

Infrastructure & Construction

railway industry

Railways

Defense

Defense

floor

Floor and Concrete

udwipan logo

WELCOME TO UDWIPAN — High Performance, Industrial Paint Trader in Saurashtra and Kutch Region.

Types of Coating

Protective Coating

Powder Coating

© 2025 Udwipan Coatings. All Rights Reserved. Trusted Partner – Grand Polycoats Company Pvt. Ltd.

Pure Polyester Powders

GP Envirocoat Pure Polyester Powder Coatings are thermosetting powders based on durable polyester resins. They are specifically designed for exterior environment, offering excellent UV resistance, good resistance to discoloration & outstanding outdoor durability.

Epoxy Polyester Powders

GP Envirocoat Epoxy Polyester Powder Coatings are thermosetting powders based on epoxy & polyester resins. They have good mechanical properties, excellent over bake resistance, very good chemical & corrosion resistance and outstanding flow-levelling characteristics. They are ideally suited for indoor applications.

Epoxy Primer

Polyurethane Powder Coatings are thermosetting powders based on durable polyester resins cross linked with IPDI hardner suited for applications where excellent flow is required and where UV & outdoor resistance is required.

Zinc Rich Primer

“GP ENVIROCOAT 205 ZR is a powder coating primer containing Zinc which is designated to impart excellent corrosion protection. It consists of two-coat system with Zinc Rich primer followed by powder coating Topcoat. This product is ideal for usage in C-3 & C-4 corrosion Environment system as per ISO 12944.”

GP PU Mastic

  • Two component Aliphatic Polyurethane based mastic coat
  • Solid by Volume 60%
  • Application by Brush, spray, HVLP or Airless gun
  • Recommended DFT 100 – 120 micron over well prepared surface like St 2, St 3 or blast cleaned

GP Bond Unicoat

  • Two component Aliphatic Polyurethane based unicoat
  • Solid by Volume 40%
  • Application by spray, HVLP or Airless gun
  • Recommended DFT 40 – 60 micron over well prepared surface like St 2, St 3 or blast cleaned

GP PU Paint

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Recommended for Project Process, Power Electrical, Machine Tools, auto component both Ferrous and Nonferrous

PU 147 AG Top Coat

  • Saturated Polyester Aliphatic Polyurethane
  • Solid by Volume 50%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Recommended for Oil and Gas, Defense, Railways

PU 145 Top Coat

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 57%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 50 – 75 micron over primer

PU 144 Top Coat

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 57%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 50 – 75 micron over primer

PU 143 Top Coat

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 48%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 50 – 60 micron over primer

PU 142 Top Coat

  • Aliphatic Polyurethane based topcoat
  • Solid by Volume 40%
  • Application bu Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 -40 micron over primer
  • Recommended as an Topcoat for general industrial application

PU 141 Top Coat

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer

PU 141 Top Coat CR

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer

GP Coat 132

  • Acrylic Aromatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Recommended for Machine Tools, Power Electrical, Pump Motor Valves, Construction Infrastructure for indoor installation

GP Coat 131

  • Aromatic Polyurethane
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Recommended as Topcoat for Pump, Motor, Valves applications & indoor installations

GP Acrylic PU Paint

  • Acrylic Aliphatic Polyurethane
  • Solid by Volume 45%
  • Application by Roller, Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 50 micron over primer

GP Interbond 151

  • Polyurethane based primer surfacer
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 -40 micron over primer

GP Guard PU MIO 133

  • Polyurethane based MIO intermediate coat
  • Solid by Volume 50%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 60 -80 micron over primer

GP PU Mastic

  • Two component Aliphatic Polyurethane based mastic coat
  • Solid by Volume 60%
  • Application by Brush, spray, HVLP or Airless gun
  • Recommended DFT 100 – 120 micron over well prepared surface like St 2, St 3 or blast cleaned

GP Prime 225

  • High build epoxy primer
  • Solid by Volume 70%
  • Application by Airless, Conventional and HVLP spray gun
  • Recommended DFT 70-100 micron in a Single coat over St2, St3 or Blast cleaned surface
  • Ideal for components exposed to wear and tear, abrasion like motors

GP Prime 105

  • Two component Acrylic PU primer
  • Solid by Volume 40%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3 prepared surface
  • Recommended for genral industrial applications, Bus bodies, Auto component

GP Prime 102

  • Two-component PU Zinc Chromate primer
  • Solid by Volume 40%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3, Seven tank Phosphated or Blast cleaned surface
  • Recommended for general industrial applications like electrical panels and alternators

GP Prime 101

  • Two-component PU Zinc phosphate primer
  • Solid by Volume 40%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3, Seven tank Phosphated or Blast cleaned surface
  • Recommended for general industrial applications like Electrical panels, Alternators, Bus bodies, etc

GP Prime 100

  • Clear Polyurethane primer
  • Solid by Volume 40%
  • Application by Brush, Spray
  • Recommended DFT – 40 – 60 micron, over acid cleaned, abrasive cleaned concrete or emery scuffed Wood
  • Ideal primer for Wood, Concrete

GP Synthetic Topcoat

  • Single pack quick drying topcoat
  • Solid by Volume 35%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Trucoat 339

  • Single pack quick drying topcoat
  • Solid by Volume 35%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Trucoat 336

  • Single pack quick drying topcoat
  • Solid by Volume 35%
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Trucoat 333

  • Single pack air drying topcoat
  • Solid by Volume 35%
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Trucoat 331

  • Single pack air drying topcoat
  • Solid by Volume 35%
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 35 micron over primer

GP Bond 951 PU IMC Coating

  • Two component Aliphatic Polyurethane based In mold coating
  • Solid by Volume 20%
  • Application by spray
  • Recommended DFT 15 -18 micron

Vinyl Top Coat

  • Single pack Vinyl topcoat
  • Solid by Volume 32%
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 50 micron over primer
  • Recommended for Project Process, Oil Gas, Infrastructure Construction

Torc

  • Single pack phenolic alky based topcoat
  • Solid by Volume 35%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer
  • Confirms to the requirement of Transformer Oil resistance coating as per BIS 14947

GP Stove Coat 334

  • Alkyd Melamine amino stoving topcoat
  • Solid by volume 35%
  • Application by Conventional spray, Electrostatic or HVLP spray
  • Recommended DFT 30 -40 micron
  • Recommended for Auto Component, Bus body

GP Vinyl HB Intermediate

  • Single pack modified Vinyl based intermediate
  • Solid by Volume 32%
  • Application by Conventional, HVLP and Airless spray gun
  • Recommended DFT 65 – 85 micron over primer

GP TORC Intermediate MIO

  • Single pack Phenolic alkyd based MIO intermediate
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP gun
  • Recommended DFT 30 – 40 micron over primer

Special Polymer Vinyl Primer

  • Single Pack modified Vinyl based primer
  • Solid by Volume 32%
  • Application by Conventional, HVLP or Airless gun
  • Recommended DFT 65- 85 micron over St2, St3 or blast cleaned surface

Special Polymer TORC Primer

  • Single Pack Phenolic alkyd based Oil resistance primer
  • Solid by Volume 40%
  • Application by brush, Conventional and HVLP spray gun
  • Recommended DFT 30 – 35 micron over St2, St3 or blast cleaned surface

Special Polymer Sealcast Primer

  • Single Pack Air drying acrylate alkyd Primer
  • Solid by Volume 35%
  • Application by Conventional and HVLP spray gun
  • Recommended DFT 30 -35 microns over St2, St3 or Pretreated surface
  • Recommended for general industrial applications like steel furniture

Special Polymer 306 Primer

  • Single Pack Air drying acrylate alkyd Primer
  • Solid by Volume 35%
  • Application by Conventional and HVLP spray gun
  • Recommended DFT 30 -35 microns over St2, St3 or Pretreated surface
  • Recommended for general industrial applications like steel furniture

Special Polymer 304 Primer

  • Alkyd amino Stoving primer
  • Solid by Volume 35%
  • Application by Conventional, HVLP or Electrostatic spray gun
  • Recommended DFT 25 – 35 microns over St2, St3 or Pretreated surface
  • Recommended for general industrial applications like steel furniture

GP Truprime 301

  • Single Pack Air drying Primer
  • Solid by Volume 35%
  • Application by Conventional and HVLP spray gun
  • Recommended DFT 30 -35 micron over St2, St3 pretreated surface
  • Recommended for general industrial applications

GP Rustcoat 505

  • Single Pack Air drying primer cum rust convertor
  • Solid by Volume 35%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 microns over St2, St3 or Pretreated surface
  • Recommended for Motors, Castings, Construction Infrastructure

GP Rustcoat 503

  • Two Pack Polyurethane based primer cum rust convertor
  • Solid by Volume 40%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3 or Pretreated surface

GP Rustcoat 502

  • Single Pack Air drying primer cum rust convertor
  • Solid by Volume 35%
  • Application by Brush, Conventional and HVLP spray gun
  • Recommended DFT 30 -40 micron over St2, St3 or Pretreated surface

GP Toughguard 5100

  • Elastomeric Polyurethane Coating for Coating for Metal and concrete
  • Solid by Volume 100%
  • Application by Dual component gun with static mixer arrangement
  • Recommended DFT – 1000 – 1200 micron, over a primer
  • Recommended for Cooling tower, Mounded bullets, External of MS Pipes.

GP Toughguard 5000

  • Elastomeric Pure Polyurea Coating for Concrete, Metal, Expanded, Polystyrene
  • Solid by Volume 100%
  • Application by Dual component gun
  • Recommended DFT – 1000 – 1500 micron, over a primer
  • Recommended for Dams, Tunnels, Theme Parks, Drainage lines, Truck, Bed liner, Clarifiers, Water pipelines

GP Tough guard 1000

  • Elastomeric Polyurethane coating for Concrete, Metal
  • Solid by Volume 100%
  • Application by Dual component gun
  • Recommended DFT – 1000 – 1500 micron, over a primer
  • Recommended for Mounded bullets, Tanks

GP Prime 708

  • Clear epoxy primer for concrete, metal, Wood
  • Solid by Volume 100%
  • Application by Brush, Spray
  • Recommended DFT – 40 – 60 microns, over acid, cleaned, abrasive cleaned
  • Concrete or emery scuffed Wood, blast cleaned Metal surface

CR 651 Top Coat

  • Single pack Chlorinated rubber-based topcoat
  • Solid by Volume 35%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 -40 micron over primer

CR 641 Top Coat

  • Single pack acid resistance topcoat
  • Solid by Volume 50%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 50 – 75 micron over primer

GP Guard MIO 643

  • Chlorinated rubber based high build MIO Coating
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP gun
  • Recommended DFT 50 -75 micron over primer
  • Recommended for Oil Gas, Infrastructure Construction

GP Prime 601

  • Single Pack modified Vinyl based primer
  • Solid by Volume 38%
  • Application by Brush, Conventional, HVLP gun
  • Recommended DFT 35 – 50 micron over St2, St3 or blast cleaned surface

GP Chloroprime 602

  • Single Pack modified Chlorinated rubber based primer
  • Solid by Volume 35%
  • Application by Brush, Conventional, HVLP gun
  • Recommended DFT 35 – 50 micron over St2, St3 or blast cleaned surface

GP SIL HR 633 (600 C)

  • Single pack heat resistance paint
  • Solid by Volume 20%
  • Application by Conventional, HVLP spray gun
  • Recommended DFT 20 -30 microns on blast cleaned surface
  • Recommended for Pump Motor Valves, Project Process, Oil and Gas, Powe Electrical

GP SIL HR 632 (400 C)

  • Single pack Silicon-based heat resistance paint
  • Solid by Volume 25%
  • Application by Conventional, HVLP spray gun
  • Recommended DFT 15 -25 micron over blast cleaned surface or Zinc silicate primer
  • Recommended for Pump Motor Valves, Project Process, Oil and Gas, Powe Electrical

GP HR 631 (250 C)

  • Single pack heat resistance paint
  • Solid by Volume 40%
  • Application by Conventional, HVLP spray gun
  • Recommended DFT 20 -30 micron over St2, St3 or blast cleaned surface

GP Stovecoat 334

  • Alkyd Melamine amino stoving topcoat
  • Solid by volume 35%
  • Application by Conventional spray, Electrostatic or HVLP spray
  • Recommended DFT 30 -40 micron

Shop coat primer

  • Inorganic Ethyl Zinc Silicate based pre-fabrication Primer
  • Solid by Volume approx 30%
  • Application by Conventional, HVLP or Airless spray gun
  • Recommended DFT 25 -35 microns over blast cleaned surface

GP Prime 402

  • Inorganic Ethyl Zinc Silicate based Primer
  • Solid by Volume approx 55 – 62%
  • Application by Conventional, HVLP or Airless spray gun
  • Recommended DFT 60 – 75 micron over blast cleaned surface

GP Guardline 291

  • Epoxy Novalac coating
  • Solid by Volume 67%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 100 – 125 micron over primer or blast cleaned surface

GP Superguard Glass Flake

  • High build epoxy coating containing glass flake Finish Paint
  • Solid by Volume 88%
  • Application by Brush and Airless gun
  • Recommended DFT 150 – 200 micron over primer or blast cleaned surface

GP HBSL Epoxy Coating

  • Solventless Epoxy Polyamine Finish Paint
  • Solid by Volume 100%
  • Application by Brush and Airless gun
  • Recommended DFT 250 – 500 micron over primer or blast cleaned surface

GP Hisols 272

  • Solventless Epoxy Cycloaliphatic amine/ Polyamine Finish Paint
  • Solid by Volume 100%
  • Application by Brush and Airless gun
  • Recommended DFT 100 – 150 micron over primer

GP Hisols 271

  • Solventless Epoxy Polyamide Finish Paint
  • Solid by Volume 100%
  • Application by Brush and Airless gun
  • Recommended DFT 100 – 150 micron over primer

GP Guard 232

  • Epoxy Coal tar high build Finish Paint
  • Solid by Volume 70%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 75 -100 micron over primer or blast cleaned surface

GP Guard 231

  • Epoxy Polyamide Finish Paint
  • Solid by Volume 40%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 30 – 40 micron over primer

Epoxy Top Coat 234

  • Epoxy Polyamide Finish Paint
  • Solid by Volume 58%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 65 – 75 micron over primer

Epoxy Novalac

  • Solventless Epoxy Novalac coating
  • Solid by Volume 100%
  • Application by Brush, Airelss and Dual component gun
  • Recommended DFT 300 – 500 micron over primer or blast cleaned surface

GP Guard HB 234

  • Epoxy Polyamide Finish Paint
  • Solid by Volume 58%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 65 – 75 micron over primer

GP Guard MIO 240

  • Epoxy Polyamine intermediate cum finish coat
  • Solid by Volume 65%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 75 – 100 micron over primer

GP Guard MIO 233

  • Epoxy MIO intermediate
  • Solid by Volume 50%
  • Application by Brush, Conventional, HVLP and Airless gun
  • Recommended DFT 60 – 80 micron over primer

GP Prime 213 AD Epoxy

  • Single component modified Epoxy primer
  • Solid by Volume 40%
  • Application by Brush, Dipping Conventional and HVLP spray gun
  • Recommended DFT 30 -50 micron over St2, St3 or Blast cleaned surface

GP Primeguard 235 UFD

  • Surface tolerant mastic high build epoxy primer
  • Solid by Volume 80%
  • Application by Airless, Conventional and HVLP spray gun
  • Recommended DFT 80-100 micron in a Single coat over Minimal prepared or blast cleaned surface.
  • Recommended for tanks, structures, chemical plants, Power segment equipments, motors

GP Rustguard 238

  • Surface tolerant Coal Tar epoxy primer cum finish coat
  • Solid by Volume 63%
  • Application by Airless, Conventional, brush and HVLP spray gun
  • Recommended DFT 100 -120 micron
  • Excellent water resistance, hence recommended for water storage tanks

GP Primeguard 235

  • Surface tolerant mastic high build epoxy primer
  • Solid by Volume 80%
  • Application by Airless, Conventional and HVLP spray gun
  • Recommended DFT 75 -100 micron in a Single coat over Minimal prepared or blast cleaned surface.
  • Recommended for tanks, structures, chemical plants, Power segment equipments, motors

GP Prime 211 HBHS

  • Surface tolerant high build epoxy primer.
  • Solid by Volume 63%
  • Application by Airless, Conventional and HVLP spray gun
  • Recommended DFT 60 – 80 micron over St 2, St3 or blast cleaned surface
  • Recommended for tanks, structures, chemical plants, Power segment equipments, motors

GP Prime 206

  • Epoxy Zinc phosphate primer Grey
  • Solid by Volume 40%
  • Application by Conventional, HVLP, Flow coat and Airless application
  • Recommended DFT 30 -40 micron over St 2, St3 or blast cleaned surface
  • Recommended for general industrial applications like Electrical panels, Construction equipment, Radiators, etc.

GP Prime 203

  • Epoxy Zinc chromate primer Yellow
  • Solid by Volume 40%
  • Application by Conventional Brush,Spray, HVLP, Airless gun, Roller or Flow coating
  • Recommended DFT 30 -40 micron over St 2, St3 or blast cleaned surface
  • Recommended for Pumps, Motor and Valve

GP Prime 202

  • Epoxy Redoxide Zinc chromate primer
  • Solid by Volume 40%
  • Application by Conventional Brush, Spray, HVLP, Airless gun, Roller or Flow coating
  • Recommended DFT 30 -40 micron over St 2, St3 or blast cleaned surface
  • Recommended for moderate to mild chemical environment

GP Prime 201

  • Two component Epoxy Redoxide Zinc phosphate primer.
  • Solid by Volume 40 %
  • Application by Conventional Brush,Spray, HVLP, Airless gun, Roller or Flow coating
  • Recommended for Plants, general industrial application
  • Recommended DFT 30 -40 micron over St 2, St3 or blast cleaned surface

GP Prime 200

  • Clear epoxy penetrating primer for concrete, Wood
  • Solid by Volume 50%
  • Application by Brush, Spray
  • Recommended DFT – 40 – 60 micron, over acid cleaned, abrasive cleaned concrete or emery scuffed Wood
  • Ideal primer for Wood, Concrete.

Epoxy Primer 216

  • Epoxy high build primer
  • Solid by Volume 63 %
  • Application by Airless, Conventional and HVLP spray gun
  • Recommended DFT 70 -80 micron over blast cleaned surface
  • Ideal for tanks, structures, chemical plants, Power segment equipments, motors

Epoxy Primer 209

  • Epoxy pre fabrication primer
  • Solid by Volume 30 %
  • Application by Conventional, HVLP and Airless gun
  • Recommended DFT 20 -25 micron over blast cleaned surface
  • Recommended for engineering building, Project, Sheet metal protection

Epoxy Primer 206 FR

  • Epoxy Zinc phosphate Primer
  • Solid by Volume 48 %
  • Application by Conventional, HVLP, Flow coat, Flood coat, and Airless gun
  • Recommended DFT 30 -50 micron, surface preparation – Seven tank phosphating, Blasting, Manual cleaning
  • Recommended for Tractors, Construction equipments, general industrial applications